Buffalo Tools IW12BX Instruções de Operação descarregar pdf (Página 10)

SFSB90 90 Lb. Siphon Feed Abrasive Blaster Assembly & Operating Instructions

. Squeeze the Control Lever of the Sandblasting Gun to release the media. NOTE: The flow rate of the media may be

0. When the sandblasting job is completed, release pressure on the Control Lever of the Sandblasting Gun. Turn off

irregular when the Sandblasting Gun is first started. Provided the media is dry, the flow rate will become normal in

approximately one minute.

the air compressor.

MAINTENANCE

Keep your abrasive blaster clean, and protect it from damage.

o clean the exterior of the Pressure Blasting System, wipe with a clean, damp cloth using a mild detergent or mild

After 10-12 hours of blasting time the nozzle should be checked for wear. The nozzle will wear out over

solvent. Do not immerse the tool in liquids.

time and should be replaced when the hole is no longer round or the abrasive media does not flow

smoothly through it.

1 2 ... 5 6 7 8 9 10 11 12

Sem comentários

Buffalo Tools IW12BX Instruções de Operação Página 10